Tech Tip #18: Oil Analysis Procedures

Written by Dr. Diesel

Share

Helpful tip to avoid downtime with your Perkins, Deutz and other Industrial engines (Part 2) – Tech Tip #18

In preparing for the Foley Oil Analysis, we recommend the following:

  • Our analysis works best with old, warm, lube oil sampled after the flow has started. We could work with oil drawn while cold and not sampled mid-stream, but this is not ideal.
  • Return the oil sample to us in the Foley container with your daytime phone, fax number and mailing address. We will contact you within 10 days with your report and analysis.
  • While oil sampling is an important diagnostic tool, it does not replace other tests such as liquid pressure testing, compression testing, non-destructive magnetic particle inspection or magnafluxing, etc. Moreover, spectrographic oil sampling ideally should be an ongoing part of your normal maintenance procedure. That way baseline measurements can be established and time series data collected and monitored.

Share

Written by Dr. Diesel
Knowledge is power. To help our customers, we share tech tips summarizing some of our opinions, knowledge and information of interest that we have gathered since 1916 when Foley Engines opened for business. If you have any questions or comments, go to “Ask Dr. Diesel™” where you can pose questions about engines, clutches, exhaust scrubbers, etc.
×